Image shown may not reflect the final product
Check similar products or call us on +44 20 4570 3439 for assistance
1 ready to ship
Image shown may not reflect the final product
Check similar products or call us on +44 20 4570 3439 for assistance
Express delivery
Lightning fast delivery if ordered within 00:00:00
Hassle-free returns
No hidden fees or duties
Swift dispatch and delivery
Specification & Description
| Specification | Description |
|---|---|
| Part Number | 1534517 |
| Manufacturer | Phoenix Contact |
| Part Type | Bus system flat-type plug |
| Connector Type | M12, 5-pos., B-coded, shielded |
| Mounting Type | Rear/screw mounting with M16 thread |
| Cable Length | 1 metre |
| Cable Type | INTERBUS, 3 x 2 x 0.22 mm² |
| Conductor Cross Section | 0.22 mm² |
| Conductor Material | Bare Cu litz wires |
| Insulation Material | PE (Polyethylene) |
| Outer Sheath Material | PUR (Polyurethane) |
| Cable Colour | Green RAL 6017 |
| Shielding | Braided copper wires |
| Rated Current | 4 A (at 40°C) |
| Rated Voltage | 60 V DC / 48 V AC |
| Test Voltage | 2500 V |
| Insulation Resistance | ≥ 100 MΩ (M12 connector) |
| Contact Material | CuZn (Copper-Zinc) |
| Contact Surface Material | Ni/Au (Nickel/Gold) |
| Contact Carrier Material | PA 6.6 (Polyamide) |
| Sealing Material | FKM (Fluoroelastomer) |
| Degree of Protection | IP67 (when plugged in) |
| Ambient Temperature Range | -40 °C to 85 °C (without mechanical actuation), -25 °C to 85 °C (Plug/socket) |
| Flame Resistance | IEC 60332-1 |
| Insertion/Withdrawal Cycles | > 100 |
| Torque | 2 Nm to 3 Nm (Installation-side) |
| Signal Speed | 0.66 c |
| Nominal Voltage (Cable) | 250 V |
| Test Voltage Core/Core | 1500 V |
| Test Voltage Core/Shield | 1000 V |
| Cable Capacity | ≤ 60 nF/km (At 800 Hz) |
| Loop Resistance | ≤ 159.80 Ω/km |
| Near End Crosstalk Attenuation (NEXT) | ≥ 61 dB (at 772 kHz), ≥ 59 dB (with 1 MHz), ≥ 55 dB (at 2 MHz), ≥ 50 dB (at 4 MHz), ≥ 46 dB (at 8 MHz), ≥ 44 dB (at 10 MHz), ≥ 41 dB (at 16 MHz), ≥ 40 dB (at 20 MHz) |
| Approvals | EAC |
| Standards and Regulations | M12 connector IEC 61076-2-101, Flammability rating according to UL 94V0 |
| Safety Note | The connectors may not be plugged in or disconnected under load. Only electrically qualified personnel may install and operate the product. Ensure that the protective or functional ground has been properly connected. |
The Phoenix Contact 1534517 is a high-quality bus system flat-type plug designed for reliable and efficient connectivity in industrial automation applications. This 5-position, M12, B-coded male connector is shielded to ensure optimal signal integrity and is pre-assembled with a 1-metre bus cable, making it ready for immediate use. The connector features a robust M16 thread for secure rear/screw mounting, providing a stable and durable connection.
Engineered to withstand harsh environmental conditions, the Phoenix Contact 1534517 operates effectively within a temperature range of -25°C to 85°C and offers a high degree of protection with IP67 and IP65 ratings when plugged in. The connector is compliant with IEC 61076-2-101 standards, ensuring compatibility and performance in various industrial settings.
The cable is constructed with a 3 x 2 x 0.22 mm² conductor cross-section, featuring a braided copper wire shield and a durable PUR outer sheath in a distinctive green colour (RAL 6017). This design provides excellent resistance to mechanical stress and environmental factors, making it suitable for both fixed and flexible installations.
With a rated current of 4 A and a rated voltage of 60 V, the Phoenix Contact 1534517 is ideal for use in INTERBUS systems, offering reliable data transmission and robust performance. The connector's high insulation resistance of ≥ 100 MΩ and a test voltage of 2500 V further enhance its reliability and safety in demanding industrial environments.
This bus system flat-type plug is an excellent choice for engineers and technicians seeking a dependable and easy-to-install solution for their automation and control systems.
Commonly Asked Questions
Is my order covered by a warranty?
Marvo provides a full 12-month warranty on all products, whatever the condition. For your peace of mind, all parts are ‘Marvo Approved’ which means that they have been tested and checked to ensure that they are in working condition. If you are unhappy with the part(s) you received and would like to request a return, you can do so by completing our quick and easy online form. Once we have received your Returns Request, a member of the team will be in touch to discuss this further with you. You can read more about our warranty policy here.
Read more...What payment methods do you accept?
We accept card payments from all major credit, debit and Mastercard providers including Visa, American Express, Western Union, Paypal and bank transfers. Before you complete an order you will be prompted to input your payment details, at which point you can enter the relevant card information you wish to use for your transaction. If you are experiencing issues with your payment method then you can contact our team via email here. From there, you will be directed to the most relevant resource or person to help you complete your payment, get your order processed and ensure that your parts are on the way to your delivery address.
Read more...Is Marvo a credible parts supplier?
Marvo is a highly credible supplier of industrial automation parts and components with dedicated hubs around the world offering industry-leading products and services. Marvo is committed to providing a quick, easy and reliable place to source your automation and control components. All purchases come as standard with a comprehensive 12-month return to base warranty meaning that, in just a few clicks, you can source critical parts more seamlessly than ever before. Click here to read an article on how Marvo is redefining convenience for automation and manufacturing professionals.
Read more...Have steps been taken to ensure quality control?
Marvo takes pride in product quality and has put several measures in place to assure high levels of quality standards. For your peace of mind, all parts have been ‘Marvo Approved’ which means that they have been tested and checked to ensure that they are in working condition. Redefine convenience and secure priority delivery on all parts along with a comprehensive 12-month warranty. This is the smart new way to buy automation and control components.
Read more...How do I create an account?
Creating an account is incredibly simple and takes a matter of seconds. You can create a Marvo account at any time by clicking here and following the simple steps on screen. By creating a Marvo account you can store your contact details, delivery addresses, billing addresses and more, meaning that you can enjoy game-changing convenience faster than ever before.
Read more...Peace of mind with every purchase
Anna
‘I can recommend quick, efficient, and professional.’
Martin Juřica
‘Fast offer, short delivery time.’
Milan Kosík
‘Large selection of spare parts, fast delivery.’
Kayden
‘Services is great.’
Nathalie Jolicoeur
‘Great service. Thank you.’
Ms. Mia
‘Quick response, good item, delivery on schedule.’
Julien
‘Perfect quick delivery, good service.’
Thomas Roland Geaughan
‘Prompt and expert service. Ease of access to find the parts I needed.’
Martin Ruml
‘Rapid delivery.’
Our service to you
Lightning-Fast Express Shipping: Receive your order in record time with our express shipping options, ensuring you minimize downtime and keep your projects on track.
No-Risk Returns, Guaranteed: Return your parts anytime for a full refund. Our hassle-free return policy ensures you’re never stuck with something you don’t need.
Clear Pricing with No Hidden Fees: What you see is what you pay, transparent pricing with no extra costs, ever. Rest assured, all taxes and fees are already included in your final price.
Rock-Solid Reliability at a Fraction of the Cost: Get pre-owned electronic parts that are fully tested for peak performance, saving you money without compromising on quality, backed by a comprehensive warranty.
Frequently Asked Questions
What type of connector is this part?
This part is a bus system flush-type male connector, specifically designed for INTERBUS systems.
How many positions does the connector have?
The connector has 5 positions.
What is the length of the cable provided with this connector?
The connector comes with a 1 metre bus cable.
What is the rated current for this connector?
The rated current for this connector is 4 A at 40°C.
What is the rated voltage for this connector?
The rated voltage for this connector is 60 V.
What is the degree of protection offered by this connector?
The connector offers a degree of protection of IP67 when plugged in.
What is the ambient temperature range for operation?
The ambient temperature range for operation is -25°C to 85°C.
What type of coding does the connector use?
The connector uses B-coding.
What is the material of the contact carrier?
The contact carrier material is PA 6.6.
What is the material of the external sheath of the cable?
The external sheath of the cable is made of PUR (Polyurethane).
Is the connector shielded?
Yes, the connector is shielded.
What is the test voltage for the core to core insulation?
The test voltage for core to core insulation is 1500 V.
What is the test voltage for the core to shield insulation?
The test voltage for core to shield insulation is 1000 V.
What is the insulation resistance of the M12 connector?
The insulation resistance of the M12 connector is ≥ 100 MΩ.
What is the conductor cross section of the cable?
The conductor cross section of the cable is 0.22 mm².
Part conditions explained
We want your buying experience to be as seamless as possible. So, here are all of the product descriptions you will see when browsing Marvo, explained a little further:
New unsealed: The product is in its original packaging, but the packaging has been opened or unsealed. It has never been used and should be in near pristine condition.
New sealed: The product is sealed in its original packaging. It has never been opened or used, ensuring that it's in an untouched state.
New unboxed: The product does not come in its original packaging, but it has never been used and is in great working condition.
Refurbished: The product has been previously used, but it has undergone a thorough refurbishment process to restore it to a like-new or functional condition. Any defects or issues have been addressed, making it suitable for reuse.
Used: The product has been previously owned and has been used. It may show signs of wear and tear but is still functional and operational. The condition may vary depending on the specific item and its usage history.
